It's "hanger device" since the camera "hangs" from it - is there a problem?
Glue had dried in the knobs. Works fine
I started planning the hanger device. We needed something to act as an axle.. I decided to make a PROTOTYPE, so beware, the quality is NOT GOOD, but we had to see how it works before applying tons of time to it
Looking good so far. Btw, it doesn't work that way: you just roll the nuts in the thread and then weld the nuts to somewhere. There's gonna be some tensions and heat etc so the thread will kinda be stuck there. Don't know what's the SMART way of doing this sort of thing, but I ended up with the stucked thread and violence
The measures are good enough for PROTOTYPE
It is so.. ugly
But as we see, it works.. kinda surprising. The black knobbed bolts are M10, it's enough. The real version will have total of 8 nuts welded to the iron block to make it last longer. Only 4 would end up with bolts bending etc. Also longer bolts will allow larger rotation for the rails. But basicly, it works. This was the part I suspected the most, but seems to be OK. Also, it's very rigid!? Didn't believe before I tried..
PS one more pic: the 3D pic of the device, where you should see the idea of the thing. Pretty simple, and like I wanted: DIFFERENT
Ei kommentteja:
Lähetä kommentti